Home > Land Rover Freelander 1 L314 1996-2006 > Bulbs & Upgrades > Standard Fitment Philips Bulbs

Standard Fitment Philips Bulbs

What do you need then?

SIDE REPEATER - 501 CLEAR OR 501A AMBER
FRONT SIDE LAMP - 501
FRONT INDICATOR -  382 CLEAR OR 581 AMBER
FRONT FOG LAMP VIN 4A000001- H11
HEADLAMP UP TO 2004 (VIN 3A999999) - HALOGEN MAIN / DIP BEAM  - H4
HEADLAMP 2004 ONWARDS (VIN 4A000001) - HALOGEN MAIN BEAM - H7
MAP - 501
GLOVE BOX - 239
INTERIOR - FRONT - 272
INTERIOR - MIDDLE - 239 (5 DOOR)
LOAD AREA - 245
NUMBER PLATE - 501
TAIL/BRAKE - 380
HIGH LEVEL BRAKE LIGHT - 955
REAR FOG - 382
REVERSE - 382
REAR INDICATOR  - 382 CLEAR TO VIN 2A999999 OR 581 AMBER FROM VIN 3A000001

Warranty - Because of the way a filament bulb is designed we cannot offer any warranty on them. We choose instead to offer the best available from known quality sources. The laws of physics dictate that there is no such thing as an incandescent (halogen) bulb that can last forever. When current flows through a filament some of the filament inevitably vaporizes. After a while this results in the filament burning out.

It is possible to design an incandescent bulb so that it lasts a long time. However, there is always a compromise involved because the luminous efficacy is reduced (i.e. the amount of light that can be generated from a particular input power). The filament can be operated at a lower temperature, or a thicker filament can be used, so that it takes longer for the filament to vaporize and burn out.

An important consideration is safety. Bulbs with an extremely long life would not meet current requirements for headlights. Because they would not generate sufficient light output to make a satisfactory beam pattern.