Home > Land Rover Discovery 3 L319 2005-2009 > Steering & Suspension > Front Lower Arms & Fittings

KIT600P Polyurethane Discovery 3 Front Lower Arms & Kit For Air Sus. Models

KIT600P Polyurethane Front Lower Arm Kit for both sides 

This is our ultimate lower arm kit fitted with polyurethane bushings and a heavy duty ball joint. Polyurethane bushes aim to be equal to the original bushes in ride feeling, not harder! However they aim to be the same throughout the life rather than become weaker as standard ones do

These will fit:
Discovery 3 all air suspension models (including armoured vehicles)
Discovery 4 all models
Range Rover Sport all models

*This kit is built in house with a pair of brand new top quality arms, we fit the increased duty 35mm ball cup size ball joint (as standard on the sport) & polyurethane bushings.
The arm kit is supplied with Hub Nuts, Bolts, Nuts & Washers for all mountings, these always seize in and often cutting is the best way to remove.

Please follow the fitting guides, you will need a full geometry reset after fitting these arms, the bolts and washers are marked to set the camber, it is a good idea to paint around these before removal to get the new ones in roughly the right position. Bolts should not be fully tightened whilst the wheel(s) are suspended, do this once the vehicle is level, it's also a good idea to suggest to your alignment specialist that the bolts are loose on each side of the chassis when adjusting, this is to avoid the camber washer riding up the bolt and then needing to be replaced again. 

MPN: KIT600P, LR029306, LR029304, LR075995, LR075993
WARRANTY: 4 Year Warranty
Country of Origin: GB
Brand: Kit-See Description
£312.00 Inc. VAT
£260.00 Ex. VAT
KIT600P Polyurethane  Discovery 3 Front Lower Arms & Kit For Air Sus. Models

Share This Page...