Home > Land Rover 90, 110 & Defender L316 1983-2016 > Engine Parts > Td5 Engine Parts > ENGINE TORQUE SETTINGS

ENGINE TORQUE SETTINGS

Cylinder head.

Renew Bolts then tighten as per the sequence below to 30Nm then 65Nm then Tighten 90° then Tighten 180° then Tighten 45°

Other engine tightening torques

Main bearings (Use new bolts/nuts)
Stage 1
33 Nm
Main bearings
Stage 2
90°
Big end bearings (Use new bolts/nuts)
Stage 1
20 Nm
Big end bearings
Stage 2
80°
Oil pump to cylinder block (Use new bolts)
13 Nm

Sump bolts
 

Apply sealant at points A and B

Bolts 1-10, 12, 13, 16, 17, 19, 20 = 25 Nm

Bolts 11, 14, 15, 18 = 28 Nm

Sump drain bolt
23 Nm
Flywheel/driveplate (Use new bolts)
40 Nm+90°

Clutch pressure plate
25 Nm
Crankshaft pulley/damper centre bolt (Use new bolts)
460 Nm

Camshaft sprocket/gear
37 Nm
Camshaft carrier/cap. (Use new bolts)
25 Nm

Camshaft/rocker cover
10 Nm
Inlet manifold to cylinder head
25 Nm
Exhaust manifold to cylinder head
25 Nm
Exhaust downpipe to manifold
27 Nm
Water pump
10 Nm
Injector/clamp
32 Nm
Glow plugs
16 Nm
Crankshaft position sensor/engine speed (RPM) sensor
10 Nm
Engine coolant temperature sensor
15 Nm
Engine oil pressure switch
15 Nm